"PDS: SU2891, ZZ VOID PET MATT WHITE S697-BG45WH, version: 7-Jul-2010



Product data Fasson Specialty
ZZ VOID PET MATT WHITE S697-BG45WH
No Imprint / SU2891
EAN Code : 8712739132922
Spec Code : AG192
Issue date : 7-Jul-2010

FacestockAdhesive performance
Adhesive perfectly adapted for uses that need very high label transparence. Very strong final adhesion on a wide range of substrates.

Application and use
Once applied to the substrate on removal, an irreversible "void" fooprint message - formely invisible to the eye - will detach itself from the face film. Labels which have been removed cannot be reapplied since repositioning will leave visible proof that tampering has taken place.
Customised footprint messages in the form of tex or graphics are available on request. Preliminary tests have to be done on the substrate in real conditions of use and approved by customers.
NB : it should be noted that the adhesive gramweight is critical to obtain the correct balance of adhesion between substrate and film - especially when labelling varnished carton boards, rough or apolar surfaces.

Conversion / Printing
The top coated of this facestock allows all the conventionnal printing
Excellent conversion characteristics on flatbed and rotary presses. The performances of this adhesive with an automatic laying answer to the market needs.
Excellent conversion characteristics on flatbed and rotary presses. The performances of this adhesive with an automatic laying answer to the market needs.

Shelf life
One year , stored at 22C / 50% RH.
Imprintable polyester film , with a special absorbent surface coating , void printed

Basis Weight

82

g/m

ISO 536

Caliper

0.065

mm

ISO 534

Adhesive
A special purpose permanent, acrylic based adhesive.
Liner
BG45 white, a supercalendered glassine paper.

Basis Weight

73

g/m

ISO 536

Caliper

0.064

mm

ISO 534

Transparency

50

%

ISO 2469

Laminate

Total Caliper

0.145

mm

+/- 10 %

PERFORMANCE DATA

Initial Tack

425

N/m

FTM 9 glass

Min. appl. temp.

+5 C

Service temp.

-40 C --> +90 C

N.B. : All data to be considered as typical values.

Europe
Lammenschansweg 140
2321 JX Leiden
The Netherlands
+31 71 579 4100
label.averydennison.eu




Warranty
All statements, technical information and recommendations about AVERY DENNISON products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All AVERY DENNISON products are sold with the understanding that PURCHASER has independently determined the suitability of such products for its purposes. AVERY DENNISON products are warranted to be free of defects in material or workmanship for a period of one year from the date of shipment. Any product shown to the satisfaction of AVERY DENNISON within the time provided to be so defective shall be replaced without charge or AVERY DENNISON may issue credit in such amount as it deems reasonable however, in no event shall AVERY DENNISON be responsible for claims beyond the replacement value of the defective product or in any way liable or responsible for consequential or incidental damages.
NO EXPRESS WARRANTIES AND NO IMPLIED WARRANTIES, WHETHER OF MERCHANTIBILITY OR FITNESS FOR ANY PARTICULAR USE, OR OTHERWISE, EXCEPT AS SET FORTH ABOVE (WHICH IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES) SHALL APPLY TO PRODUCTS SOLD BY AVERY DENNISON. AVERY DENNISON SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND SIGNED BY AN EXECUTIVE OFFICER OF AVERY DENNISON.
No salesman, representative, or agent of AVERY DENNISON is authorized to give any guarantee, warranty or make any representation contrary to the above.